Box Tools With Carbide “V” Rests
Box Tools With Carbide “V” Rests
Number 45 and 46 Box tools are designed primarily for light finishing cuts where fine finishes and close tolerances are required. They are used also for general work, particularly on brass and aluminum.
These tools have carbide back rests which greatly extend their wear-life. Rests are adjustable to work on any diameter within the capacity of the tool. Tools ending 322, 500 and 620 are arranged to hold a center drill or centering tool in the shank, clamped in position by a set screw. Tools 711-45-322 and 711-46-322 are equipped with two hardened blades; all the others have one hardened blade.
| SHANK |
TURNING CAPACITY (INCH) |
||
| DIAMETER | LENGTH | DIAMETER | TOOL NO. |
| 5/8 | * | UP TO 3/16 | 711-45-400 |
| 5/8 | 5/8 * | FROM 1/4 TO 1/2 UP TO 1/4 | 711-45-500 ** |
| 3/4 | 3/4 * | FROM 5/16 TO 5/8 UP TO 5/16 | 711-45-620 |
| 1 | 2 * | FROM 7/16 TO 5/8 FROM 3/16 TO 7/16 | 711-45-322 |
| 5/8 | 1 * | FROM 5/16 TO 1/2 UP TO 5/16 | 711-46-400 |
| 1 | 2 * | FROM 7/16 TO 5/8 FROM 3/16 TO 7/16 | 711-46-322 |
| TOOL NO. | A | B | C | D | E | F | G | J | M | N | P | Q | BLADES |
| 711-45-400 | 5/16 | 17/32 | 3/4 | 5/8 | 2 | 5/16 | 3/4 | 3/8 | 13/32 | 1-1/32 | 3/32 | 5/16 | 1/4 x 5/16” |
| 711-45-500 | 9/16 | 5/8 | 1-3/8 | 5/8 | 1-3/8 | 5/16 | 1 | 19/32 | 5/8 | 1-1/2 | 1/8 | 1/4 | 1/4 x 3/8” |
| 711-45-620 | 11/16 | 11/16 | 1-1/4 | 3/4 | 1-1/2 | 3/8 | 1-1/8 | 11/16 | 7/8 | 2 | 1/8 | 1/2 | 1/4 x 3/8” |
| 711-45-322 | 11/16 | 2-1/16 | 2-5/8 | 1 | 2-1/4 | 1/2 | 1-7/16 | 3/4 | 15/16 | 2-3/16 | 1/8 | 7/8 | 3/8 x 3/8” 3/8 x 1/2” |
| 711-46-400 | 9/16 | 1-1/6 | 1-3/8 | 5/8 | 1-3/8 | 3/8 | 1 | 9/16 | 5/8 | 1-1/2 | 1/8 | 5/8 | 1/4 x 3/8” 3/8 x 3/8” |
| 711-46-322 | 11/16 | 2-1/16 | 2-5/8 | 1 | 2-1/4 | 1/2 | 1-7/16 | 3/4 | 15/16 | 2-3/16 | 1/8 | 7/8 | 3/8 x 1/2″ 1/2 x 1/2″ |
| Replacement Parts | ||||||
| Tool No. | 711-45-400 (RH) | 711-45-500 (RH) | 711-45-620 (RH) | 711-45-322 (RH) | 711-46-400 (LH) | 711-46-322 (LH) |
| Back Rest | 211-93003-1 | 211-93002-1 | 211-93001-1 | 211-93008-1 | 211-93002-1 | 211-93008-1 |
| Back Rest Set Screw | 92-5191-610 | 92-5012-812 | 92-5012-1016 | 92-5012-1012 | 92-5012-812 | 92-5012-1012 |
| Blade Screw – Long | 92-5191-616 | 92-5191-828 | 92-5191-1032 | 211-4509 | 92-5191-824 | 211-4509 |
| Blade Screw – Short | 92-5191-612 | 92-5191-814 | 92-5191-1016 | 92-5191-1016 | 92-5191-814 | 925191-1016 |
| Drill Clamp Screw | None | 92-5012-812 | 92-5012-1016 | 92-5012-1020 | None | 92-5012-1020 |
| Center Drill | None | 211-96001 | None | None | None | None |
| Body | 211-4501-2 | 211-4502 | 211-4505 | 211-4507 | 211-4602 | 211-4604 |
| Blade | 711-64075 | 711-94076 | 711-94085 | 711-94085 | 711-94076 | 711-94085 |
| Blade-Wide | None | None | None | None | 711-94083 | 711-94092 |