No. 225 Recessing Tool
No. 225 Recessing Tool
No. 225 Recessing Tools are used for internal chamfering and are actuated by the forward movement of the turret. When the adjustable tool stops contact the spindle box nut, the forward movement of the Tool Holder is stopped. Then, as the turret advances, the holder pivots to allow the recessing tool to cut.
These tools are used only for chamfering internally as they have no longitudinal internally as they have no longitudinal movement. They can be used with the spindle running in either direction.
Tools used for recessing, see Recessing Tool Blanks under our Boyar inventory. Conversion chart below:
| Used For | Tool No. | Boyar No. |
| 711-220-200
711-225-100 |
711-94500
711-94501 711-94502 |
0105185
0105186 0105187 |
| 711-225-120 | 711-94503
711-94504 711-94505 |
0105188
0105189 0105190 |
| 711-220-220 | 711-94506
711-94507 711-94508 |
0105191
0105192 0105193 |
| 711-220-222
711-225-122 |
711-94509
711-94510 711-94511 |
0105194
0105195 0105196 |
| Shank Dia. | Machine Where Used | Tool No. |
| 5/8” | 00 & 00G Auto. | 711-225-100 |
| 3/4” | 0 & 0G Auto. | 711-225-120* |
| 1” | 2 & 2G Auto. | 711-225-122* |
| Tool No. | 711-225-100 | 711-225-120 | 711-225-122 |
| Tool Holder | 211-22507 | 211-22508 | 211-22509 |
| Brass Shoe | 92-5930-504 | 92-5930-604 | 92-5930-604 |
| Spring | 92-1000-824-20 | 92-1000-1024-19 | 92-1000-1236-18 |
| Tool Clamp Screw | 92-5012-616 | 92-5010-824 | 92-5010-1032 |
| Position Screw | 92-5012-616 | 92-5010-816 | 92-5010-1020 |
| Tool Stop | 92-5120-840 | 211-22514 | 472-826 |
| Tool Stop Nut | 92-6015-814 | 92-6015-814 | 92-6015-1017 |
| Pivot Screw | 211-22517 | 211-22517 | 92-537-11 |
| Pivot Screw Nut | 92-6015-810 | 92-6015-810 | 92-6015-1012 |
| Body Washer | 92-2040-802-16 | 92-2040-802-20 | 92-2040-1204-28 |
| Body Nut | 92-6015-810 | 92-6015-810 | 92-6015-1214 |
| Set Screw | 92-5071-605 | 92-5071-808 | 92-5071-812 |
| Shank | 211-22501-2 | 211-22502 | 211-22503 |
| Body | 211-22504-2 | 211-22505-2 | 211-22506-2 |