Feed Tube Bushings
Feed Tube Bushings
Feed tube bushings are used in the rear end of feed tubes to steady and support the stock. They prevent stock from whipping in the feed tube, increasing the life of the feed tube and the feeding finger. They are installed easily in the feed tube by removing the nut on the end of the tube.
Bushings are recommended for use with all types of stock, hex, square as well as round. The round I.D. bushings also work well with hex and square stock.
*Sizes shown are stock size, not bushing hole size. Holes for bushings are slightly larger.*
Limited quantities available. Call for updated pricing and availability.
800-533-3328.
| No. 00 Round | |
| For Nos. 00 & 00G Auto. and Nos. 00 & 00G. Auto Screw Threading Commencing Serial No. 131820.) For Auto. Screw Threading (Commencing Serial No. 500.) For Auto. Cutting-Off (Opposed Spindel Type.) For Auto. Pinion Turning (1/4” max.) For No. 00 Hand Screw. | |
| Size | Tool No. |
| 1/8” | 711-1002-100 |
| 1/4″ | 711-1004-100 |
| 3/8” | 711-1006-100 |
| 1/2” | 711-1008-100 |
| No. 20 Round | |
| For No. 00 Auto. 3/4” capacity. For Nos. 0 & 0G Auto. (Commencing Serial No. 8021.) For No. 0 Hand Screw and No. 2 with 3/4” capacity spindle. | |
| Size | Tool No. |
| 1/4” | 711-1004-120 |
| 3/8” | 711-1006-120 |
| 1/2” | 711-1008-120 |
| 5/8” | 711-1010-120 |
| 3/4” | 711-1012-120 |
| No. 22 Round | |
| For Nos. 2 & 2G Auto. (Commencing Serial No. 4352.) For No. 2 Hand Screw. | |
| ‘Size | Tool No. |
| 3/4” | 711-1012-122 |
| 1” | 711-1016-122 |
| 1-1/8” | 711-1018-122 |
| 1-1/4” | 711-1020-122 |
| No. 22 Round | |
| For Nos. 2 & 2G Auto. (Commencing Serial No. 4352.) For No. 2 Hand Screw. | |
| Size | Tool No. |
| 3/4” | 711-1012-122 |
| 1” | 711-1016-122 |
| 1-1/8” | 711-1018-122 |
| 1-1/4” | 711-1020-122 |
| No. 27 Round | No. 27 Round |
| Size | Size |
| 2-1/8” | 711-1034-127 |
| 2-1/4” | 711-1036-127 |
| 2-3/8” | 711-1038-127 |
| No. 22B Round | |
| For No. 2 Ultramatic, 1-5/8” Cap. | |
| Size | Tool No. |
| 1/2″ | 711-1008-322 |
| 5/8” | 711-1010-322 |
| 3/4″ | 711-1012-322 |
| 7/8” | 711-1014-322 |
| 1-1/8” | 711-1022-322 |
| 1-1/4” | 711-1020-322 |
| 1-3/8” | 711-1022-322 |
| 1-1/2” | 711-1024-322 |
| 1-5/8” | 711-1026-322 |
| No. 26 Round | |
| For No. 4 Auto. (Commencing Serial No. 7352.) For No. 3 Auto. with 2-3/8” Capacity spindle. | |
| Size | Tool No. |
| 5/8” | 711-1010-126 |
| 3/4″ | 711-1012-126 |
| 7/8” | 711-1014-126 |
| 1” | 711-1016-126 |
| 1-1/8” | 711-1018-126 |
| 1-1/4” | 711-1020-126 |
| 1-3/8” | 711-1022-126 |
| 1-1/2” | 711-1024-126 |
| 1-5/8” | 711-1026-126 |
| 1-3/4” | 711-1028-126 |
| 1-7/8” | 711-1030-126 |
| 2” | 711-1032-126 |